Roborock Change WIFI

Are you struggling to change the WiFi settings on your Roborock vacuum cleaner? It can be frustrating to try to connect to a new network when you’re not sure how to do it. Luckily, there are a few simple steps you can follow to update your Roborock’s WiFi settings without losing any saved maps or other data.

First, it’s important to note that changing your Roborock’s WiFi network does not reset the maps. However, if you want to delete the maps, you can do so by deleting the device from the app, turning off the map saving feature, and pressing the small reset button on the device next to the WiFi LED. To change the WiFi network, you’ll need to reset the WiFi by pressing the spot cleaning button and recharge button, and then re-add the device through the app using the new network name and password. Keep reading for more detailed instructions on how to connect your Roborock to a new WiFi network.

Power Off the Roborock Device

Instructions on How to Properly Power Off the Roborock Device

To power off your Roborock device, follow these simple steps:

1. Locate the power button on the device.
2. Press and hold the power button until the device turns off.
3. Unplug the device from the power source.

It is important to turn off your Roborock device before you change its WIFI settings. This will prevent any errors or issues that may occur during the process. If the device is not turned off properly, it may cause damage to the device or corrupt its firmware.

To avoid any potential issues, it is recommended that you turn off the device and unplug it from the power source before making any changes to its WIFI settings. This will ensure that the device is completely powered down and will not interfere with the WIFI settings.

In addition, it is important to make sure that the device is not in the middle of a cleaning cycle when you power it off. This will prevent any damage to the device or any issues that may arise during the cleaning process.

Overall, it is important to follow these simple steps to properly power off your Roborock device before making any changes to its WIFI settings. This will ensure that the device is not damaged and that any changes made to its settings are successful.

Reset the WIFI Settings on Roborock Device

If you are having trouble connecting your Roborock to your WIFI network, resetting the WIFI settings may be the solution. Here are the detailed instructions on how to reset WIFI settings for different Roborock models:

Reset Roborock Wifi through app

1. Open the Roborock app and select your device.
2. Tap on the three dots in the top right corner and select “Device Settings.”
3. Scroll down and select “WiFi Settings.”
4. Tap “Forget this network” to remove the current wifi network.
5. Connect your phone to the new wifi network.
6. Follow the on-screen instructions to connect your Roborock to the new wifi network.

How to reset directly different Roborock models

Reset Roborock S5

1. Hold the recharge button for 3-5 seconds.
2. Use a pin to press the reset button next to wifi LED just once.
3. The power button, recharge button, and spot cleaning button’s light will go out.

Resetting Roborock S6 series and S5 Max models

1. Press and hold the Home button.
2. While still holding the button, use a pin or paperclip to press the reset button (this is located next to the WiFi light).
3. Press the reset button until the lights on the Power, Home, and Spot Cleaning buttons go out.

Reset Roborock S6Maxv

1. Press the spot cleaning button and recharge button simultaneously.
2. The Roborock will say “Resetting WiFi” and then the wifi LED will start flashing.
3. Follow the on-screen instructions in the app to connect your Roborock to the new wifi network.

Roborock Q7 and Q7 Max

To reset the WIFI on your Roborock Q7 or Q7 Max, follow these steps:

1. Press and hold the power button and the spot cleaning button simultaneously until the WiFi indicator light starts flashing.
2. Release both buttons and wait for the light to stop flashing.
3. The WiFi settings will now be reset to their default settings.

Roborock S7 and S7 Max

To reset the WIFI on your Roborock S7 or S7 Max, follow these steps:

1. Press and hold the home button and the power button simultaneously until the WiFi indicator light starts flashing.
2. Release both buttons and wait for the light to stop flashing.
3. The WiFi settings will now be reset to their default settings.

Roborock S8, S8 Pro, and S8+

To reset the WIFI on your Roborock S8, S8 Pro, or S8+, follow these steps:

1. Press and hold the recharge button and the power button simultaneously until the WiFi indicator light starts flashing.
2. Release both buttons and wait for the light to stop flashing.
3. The WiFi settings will now be reset to their default settings.

Roborock Q5

To reset the WIFI on your Roborock Q5, follow these steps:

1. Press and hold the spot cleaning button and the power button simultaneously until the WiFi indicator light starts flashing.
2. Release both buttons and wait for the light to stop flashing.
3. The WiFi settings will now be reset to their default settings.

How to Access the Device’s Settings and Where to Find the WIFI Reset Option

To access the device settings, open the Roborock app and go to the “Device” tab. From there, you can select your robot and access its settings. The WIFI reset option can typically be found under “Advanced Settings” or “WiFi Settings.” Follow the prompts to reset the WIFI settings and connect to a new network.

Resetting the WIFI settings on your Roborock can help solve connectivity issues. Follow the instructions above for your specific model to reset the WIFI settings and connect to a new network.

Connect to the New WIFI Network

If you need to connect your Roborock to a new WIFI network, you can do so by following a few simple steps. Here are the instructions on how to connect the device to a new WIFI network:

Instructions on How to Connect the Device to a New WIFI Network

1. Open the Roborock app on your smartphone or tablet.
2. Make sure your device is connected to the new WIFI network you want to use.
3. Tap on the “+” icon to add a new device.
4. Choose your Roborock model from the list of available devices.
5. Follow the prompts to pair your device with the app.
6. When prompted, enter the new WIFI network name and password for your device to connect to.

Explain How to Search for Available Networks

If your device is not automatically detecting the new WIFI network, you can manually search for available networks by following these steps:

1. Go to the WIFI settings on your smartphone or tablet.
2. Look for the list of available networks.
3. Find the new WIFI network you want to connect to.
4. Select the network and enter the password when prompted.

How to Enter the New Network Password

When prompted to enter the new network password, make sure to enter it correctly to avoid any connection issues. Here are some tips to help you enter the password correctly:

• Make sure the password is case-sensitive and enter it exactly as it appears.
• Double-check that you are entering the correct password for the new WIFI network.
• If you are unsure of the password, contact your network provider or refer to the router manual for assistance.

By following these instructions, you should be able to connect your Roborock to a new WIFI network quickly and easily.

Configure the Device Settings for the New Network

When you change the WIFI network for your Roborock device, you will need to configure the device settings to match the new network. This includes adjusting important settings such as the device name, language, and zone settings. In this section, we will provide you with instructions on how to configure the device settings for the new WIFI network.

Instructions on How to Configure the Device Settings for the New WIFI Network

1. Open the Roborock app on your smartphone.
2. Tap on the device icon to access the device settings.
3. Tap on the “Device Settings” option.
4. Tap on the “WiFi Settings” option.
5. Select the new WIFI network from the list of available networks.
6. Enter the new WIFI network password.
7. Wait for the device to connect to the new WIFI network.

Change Roborock Wifi Settings

Once your device is connected to the new WIFI network, there are a few important settings that you may need to adjust. These include:

• Device Name: You may want to change the name of your device to make it easier to identify.
• Language: You may need to change the language settings to match your preferred language.
• Zone Settings: You may need to adjust the zone settings to match your current location.

To adjust these settings:

1. Open the Roborock app.
2. Tap on the device icon to access the device settings.
3. Tap on the “Device Settings” option.
4. Tap on the setting that you want to adjust.
5. Make the necessary changes.
6. Tap on the “Save” button to apply the changes.

Test the Connection and Ensure the Device is Functioning Properly

If you have successfully changed the WIFI network of your Roborock, it is important to test the connection and ensure that the device is functioning properly. Here are some instructions on how to do that:

How to Test the New WIFI Connection

1. Open the Roborock app on your device.
2. Go to the settings and select “Robot Settings”.
3. Choose “WiFi Settings” and select your new network.
4. Enter the password for your new network.
5. Wait for the device to connect to the new network.

How to Check for a Strong and Stable Connection

Once you have connected the device to the new network, it is important to check for a strong and stable connection. Here’s how you can do that:

1. Check the signal strength of your WIFI network. Make sure that the signal is strong enough in the area where the device is located.
2. Ensure that there are no obstructions between the device and the router.
3. Check if there are any other devices that are using the same network. If there are too many devices connected to the network, it may affect the performance of the device.

Troubleshooting Issues That May Arise

If you encounter any issues while testing the new WIFI connection, here are some troubleshooting tips that may help:

1. Make sure that the password you entered is correct.
2. Check if the device is within range of the router.
3. Restart the device and the router.
4. Reset the device to its factory settings and try connecting it to the new network again.

How to Optimize the Device’s Performance with the New Network

To optimize the performance of your Roborock with the new network, here are some tips:

1. Make sure that the device is updated to the latest firmware version.
2. Keep the device and the router updated with the latest software updates.
3. Place the device in an area where the signal strength is strong.
4. Reduce the number of devices connected to the network to avoid network congestion.

By following these instructions and tips, you can ensure that your Roborock is functioning properly with the new WIFI network.

Conclusion

Changing the WiFi network on your Roborock vacuum cleaner is a simple process that can be done in just a few steps. Whether you are moving to a new home or you just want to change your WiFi network, following the steps provided in this article will help you to reconnect your Roborock vacuum cleaner to your new WiFi network.

It is important to note that Roborock vacuum cleaners do not work with a 5GHz WiFi network, so ensure that your WiFi network works in a 2.4GHz frequency band. Additionally, your WiFi encryption method should be WPA2. Other encryption methods or networks without a password are not supported.

Remember that changing the WiFi network will not delete the map already built because the robot does not actually need WiFi to function. The WiFi is only there for advanced features like scheduling and other settings.

If you encounter any issues when you change the WiFi network on your Roborock vacuum cleaner, refer to the manufacturer’s instructions or contact their customer support for assistance. With a little patience and persistence, you can easily change the WiFi network on your Roborock vacuum cleaner and continue to enjoy its advanced features.