If you’re having trouble with your Geeni camera, resetting it can sometimes solve the problem. You may need to reset the Geeni camera to fix issues such as, the camera not connecting to Wi-Fi or the camera not working properly. Luckily, resetting a Geeni camera is a quick and easy process.
To reset the Geeni camera, you’ll need to locate the reset button on the back of the camera. Once you’ve found the button, hold it down for about 10-15 seconds. After releasing the button, wait for the camera to reset completely. You’ll know the reset is complete when you hear a voice prompt from the camera.
When To Reset Your Geeni Camera
If you’re experiencing issues with your Geeni camera, resetting it may solve the problem. Here are some situations where resetting your Geeni camera may be necessary:
- You’re having trouble connecting to your camera: If you’re having trouble connecting to your Geeni camera, resetting it may help. After resetting, you can set up the camera again and try connecting to it.
- Your camera is not responding: If your camera is not responding, resetting it may help. This can happen if the camera freezes or stops working properly.
- You want to sell or give away your camera: If you’re planning to sell or give away your Geeni camera, resetting it is important. This will erase all your personal information and settings from the camera.
Remember that resetting your Geeni camera will erase all your settings and personal information from the camera. Before resetting, make sure to back up any important data or settings.
Pre-Reset Preparations
Before resetting your Geeni camera, there are a few preparations you need to make to ensure a smooth and successful reset process. This section will guide you through the necessary steps to take before resetting your Geeni camera.
Backup Necessary Data
Before resetting your Geeni camera, it is important to back up any necessary data that you have stored on the camera. This includes any videos or images that you have saved on the camera’s memory card or cloud storage. Make sure to transfer these files to a secure location such as an external hard drive or a cloud storage service.
Ensure Stable Power Supply
It is important to ensure that your Geeni camera has a stable power supply before resetting it. A sudden power outage or interruption during the reset process can cause damage to the camera’s firmware or hardware. Make sure that the camera is plugged into a stable power source and that the power cord is securely connected to the camera’s power port.
If you are using a battery-powered Geeni camera, make sure that the battery is fully charged before resetting the camera. A low battery can cause the reset process to fail or cause damage to the camera’s firmware.
By following these simple preparatory steps, you can ensure a smooth and successful reset process for your Geeni camera.
How do I reset my Geeni camera?
If you’re having issues with your Geeni camera, resetting it to its factory settings may help resolve the problem. Here are the steps to reset your Geeni camera:
- Locate the reset button on the back of the camera. It is usually a small hole.
- Using a pin or paperclip, press and hold the reset button for about 5 seconds.
- Release the reset button when you hear a voice prompt from the camera.
- Wait for the camera to reboot and reconnect to your Wi-Fi network.
Note that resetting your Geeni camera will erase all of its settings, including your Wi-Fi network information and any saved footage. You will need to set up the camera again from scratch after resetting it.
If you’re still having issues with your Geeni camera after resetting it, you may want to try clearing the cache of the Geeni app or contacting Geeni support for further assistance.
How do I reset my Geeni camera to a new Wi-Fi network?
If you need to change the Wi-Fi network that your Geeni camera is connected to, you’ll need to reset the camera and then re-pair it with the new Wi-Fi network. Here are the steps to follow:
- On your Geeni camera, locate the reset button on the back of the device.
- Press and hold down the reset button for at least 10 seconds.
- Release the reset button once the blue LED light on the front of the camera turns off.
- Open the Geeni app on your smartphone or tablet and log in to your account.
- Tap the “+” icon in the top right corner of the screen to add a new device.
- Select “Geeni Camera” from the list of available devices.
- Follow the on-screen instructions to complete the setup process and connect your camera to the new Wi-Fi network.
It’s important to note that resetting your Geeni camera will erase any previously saved settings, including your camera’s name and any custom settings you may have configured. After resetting the camera, you’ll need to set it up again from scratch.
If you’re having trouble connecting your Geeni camera to the new Wi-Fi network after resetting it, double-check that you’ve entered the correct Wi-Fi password during the setup process. You may also want to try resetting your Wi-Fi router and trying again if the signal is too weak.
Why is my Geeni camera blinking red and how can I fix it?
If your Geeni camera is blinking red, it generally indicates that there is a problem with the camera’s connectivity. This could be due to a weak Wi-Fi signal, incorrect login credentials, or a firmware issue.
To fix the blinking red light issue, try the following troubleshooting steps:
- Check Wi-Fi signal strength: Ensure that your camera is within range of your Wi-Fi network. If possible, move the camera closer to the router to see if the issue is resolved.
- Verify login credentials: Double-check that you have entered the correct login credentials for your Wi-Fi network. If you have recently changed your Wi-Fi password, you will need to update the camera’s settings accordingly.
- Restart the camera: Try restarting the camera by unplugging it from the power source and plugging it back in. This may help reset any connectivity issues.
- Update firmware: Check for any available firmware updates for your Geeni camera. You can do this through the Geeni app by going to the camera’s settings.
If none of these steps resolve the blinking red light issue, you may need to contact Geeni customer support for further assistance.
It is important to note that the blinking red light may also indicate that the camera is in pairing mode. If this is the case, you can follow the instructions in the Geeni app to pair the camera with your Wi-Fi network.
Post-Reset Setup
After resetting your Geeni camera, you will need to reconnect it to your Wi-Fi network and restore any camera settings you had previously set up.
Reconnect to Wi-Fi
To reconnect your Geeni camera to your Wi-Fi network, follow these steps:
- Open the Geeni app and tap on the camera you want to reconnect.
- Tap on the settings icon in the top right corner of the screen.
- Tap on “Wi-Fi Settings” and select your Wi-Fi network from the list.
- Enter your Wi-Fi network password and tap “Save”.
- Wait for the camera to connect to your Wi-Fi network. This may take a few minutes.
Once your camera is connected to your Wi-Fi network, you can proceed to restore your camera settings.
Restore Camera Settings
To restore your camera settings, follow these steps:
- Open the Geeni app and tap on the camera you want to restore settings for.
- Tap on the settings icon in the top right corner of the screen.
- Tap on “Camera Settings” and select the settings you want to restore.
- Adjust the settings as needed and tap “Save”.
If you had previously set up any automation or scheduling for your camera, you will need to set these up again after restoring your camera settings.
That’s it! Your Geeni camera should now be fully reset and reconnected to your Wi-Fi network with your preferred settings.
Troubleshooting Common Issues
If you are experiencing issues with your Geeni camera, there are a few common troubleshooting steps you can take. Here are some tips to help you resolve issues with your camera.
The reset Button Not Working
If you are unable to reset your Geeni camera using the reset button, there are a few things you can try. First, make sure that you are pressing and holding the reset button for at least 5 seconds. If the reset button is not working, try unplugging the camera from the power source and plugging it back in.
Camera Not Connecting After Reset
If you have reset your Geeni camera and are unable to connect it to the app, there are a few things you can try. First, make sure that your Wi-Fi router is online and in range. If your Wi-Fi router is online and in range, try resetting your camera again. If you are still unable to connect your camera to the app, try restarting your phone and the app.
In summary, if you are experiencing issues with your Geeni camera, try resetting the camera and ensuring that your Wi-Fi router is online and in range. If you are still having issues, contact Geeni support for further assistance.
Frequently Asked Questions
How do I reset my Geeni camera to factory settings?
To reset your Geeni camera to factory settings, you need to hold the reset button for 5-10 seconds. Once the camera is reset, it will provide a voice prompt. After the reset, you will need to set up your camera again using the Geeni app.
What should I do if my Geeni camera is not pairing?
If your Geeni camera is not pairing, there are a few things you can try. First, make sure that your camera is powered on and within range of your Wi-Fi network. You should also ensure that your Wi-Fi network is working properly and that you have entered the correct Wi-Fi password in the Geeni app. If you are still having trouble, try resetting your camera to factory settings and setting it up again.
How can I get my Geeni camera back online?
If your Geeni camera is offline, there are a few things you can do to get it back online. First, make sure that your camera is powered on and within range of your Wi-Fi network. You should also ensure that your Wi-Fi network is working properly and that you have entered the correct Wi-Fi password in the Geeni app. If you are still having trouble, try resetting your camera to factory settings and setting it up again.