How To Connect Shark Robot to New Wi-Fi

To connect your Shark Robot to a new Wi-Fi network, even if you’re not tech-savvy, the process is straightforward. With just a few simple steps, you can overcome the challenge and successfully complete the connection.

To connect the Shark Robot to a new WiFi, download the SharkClean app from the App Store or Play Store. Power on your Shark Robot and activate pairing mode by pressing and holding the top power button until the lights illuminate. Follow the on-screen instructions in the SharkClean app to connect your robot to the new Wi-Fi network.

 In this article, we will walk you through the process of connecting your Shark Robot to a new Wi-Fi network, so you can get back to enjoying a clean home.

How to connect Shark IQ Robot to a new Wi-Fi network?

If you’ve recently changed your Wi-Fi network or moved to a new place, you’ll need to connect your Shark IQ Robot to the new Wi-Fi network. Here is a step-by-step guide on how to do it:

1. First, make sure your robot is turned on and within range of your Wi-Fi network.
2. On the robot’s menu, select “Settings” and then “Wi-Fi.”
3. Select the desired network from the list of available networks.
4. Enter the password for the network when prompted.
5. Wait for the robot to connect to the new Wi-Fi network. This may take a few minutes.
6. Once the connection is established, you should see a message confirming the connection.
7. Finally, make sure the connection is secure by checking the settings on your Wi-Fi router.

It’s important to note that before attempting to connect your Shark IQ Robot to a new Wi-Fi network, you should ensure that the network is properly configured. This includes setting up the network name (SSID) and password, as well as any other settings that may be required.

How to Connect Shark Vacmop to Wi-Fi?

Connecting your Shark Vacmop to Wi-Fi is a simple process that requires just a few steps. Follow the instructions below to connect your Shark Vacmop to Wi-Fi:

1. Download the SharkClean app on your smartphone and create an account if you don’t have one already.
2. Turn on your Shark Vacmop and press and hold the “Dock” and “Max” buttons simultaneously until you hear a beep and the Wi-Fi light on the Vacmop begins to blink.
3. Open the SharkClean app and tap on the “+” icon on the top right corner of the screen to add your Vacmop to the app.
4. Follow the on-screen instructions to connect your Vacmop to the same Wi-Fi network as your smartphone. You will need to enter your Wi-Fi password to connect.
5. Once your Vacmop is connected to Wi-Fi, you can control it through the SharkClean app. You can start, stop, or schedule cleaning sessions, view cleaning history, and more.

It’s important to note that your Vacmop will only connect to a 2.4GHz Wi-Fi network. If your Wi-Fi network is 5GHz, you will need to switch to a 2.4GHz network or use a Wi-Fi extender that supports 2.4GHz.

In case you face any issues while connecting your Vacmop to Wi-Fi, refer to the user manual or contact Shark customer support for assistance.

How to change Wi-Fi network on Shark IQ Robot?

If you need to change the Wi-Fi network on your Shark IQ Robot, you can do so by following these simple steps:

1. First, make sure your robot is powered on and connected to your current Wi-Fi network.
2. Open the Shark Clean app on your mobile device and select your robot from the list of available devices.
3. Tap on the Settings icon in the top right corner of the screen.
4. From the Settings menu, select Wi-Fi.
5. You will see a list of available Wi-Fi networks. Select the network you want to connect to and enter the password when prompted.
6. Once you have entered the correct information, your Shark IQ Robot should connect to the new Wi-Fi network.

It’s important to note that you may need to reset your Shark IQ Robot if you are having trouble connecting to a new Wi-Fi network. To do this, press and hold the Dock and Max buttons on your robot for 10 seconds until the LED light on the robot turns off and then back on again.

Also, make sure that the Wi-Fi network you are trying to connect to is within range and has a strong signal. If the signal is weak, your robot may have trouble connecting and may need to be moved closer to the router.

By following these steps, you should be able to easily change the Wi-Fi network on your Shark IQ Robot and continue enjoying its many features and benefits.

Shark Robot not connecting to Wi-Fi – What to do?

If your Shark Robot is not connecting to your new Wi-Fi, don’t worry. There are some simple steps you can take to troubleshoot the issue and get your Shark Robot connected again.

First, make sure you are entering the correct Wi-Fi password. Double-check the password and try again. If it still doesn’t work, try the following steps:

• Restart your Shark Robot and your Wi-Fi router.
• Check if your Wi-Fi router is broadcasting on the 2.4GHz frequency. Shark Robots only connect to 2.4GHz networks, so make sure your router is set up properly.
• Move the router closer to your Shark Robot and your phone. Sometimes, distance can cause connectivity issues.
• Change the firewall settings and MAC filtering on your router. Sometimes, these settings can interfere with the connection.

If none of these steps work, you may need to reset your Shark Robot to its factory settings. To do this, press and hold the Clean button for 10 seconds until the Robot beeps. Then, follow the instructions on the Shark app to set up your Robot again.

Remember, if you are still having trouble connecting your Shark Robot to your new Wi-Fi, you can always contact Shark customer support for further assistance.

How to Reconnect Shark Robot to App?

If you have recently changed your home Wi-Fi network or your Shark robot is not connecting to the app, you will need to reconnect the robot to the app. Here are the steps to reconnect your Shark robot to the app:

1. Launch the SharkClean app on your smartphone or tablet.
2. Make sure your Shark robot is turned on and in range of your Wi-Fi network.
3. Tap the “Settings” icon in the top right corner of the app home screen.
4. Select “Robots” from the drop-down menu.
5. Tap on the name of your Shark robot.
6. Tap “Reconnect to Wi-Fi.”
7. Follow the on-screen instructions to connect your Shark robot to your new Wi-Fi network.

If your Shark robot is still not connecting to the app after following these steps, try resetting the robot to its factory settings. To reset the Shark robot, press and hold the “Dock” and “Max” buttons simultaneously for 10 seconds until the robot makes a sound.

After resetting the robot, follow the steps above to reconnect the Shark robot to the app. If you are still having trouble, contact Shark customer support for further assistance.

Remember, it is important to keep your Shark robot connected to the app to receive software updates and access new features. By following these simple steps, you can quickly reconnect your Shark robot to the app and continue enjoying its cleaning capabilities.

How to Reset Wi-Fi on Shark Robot?

If you need to connect your Shark Robot to a new Wi-Fi network, you’ll need to reset the Wi-Fi connection. Here’s how to do it:

1. Turn off your Shark Robot by pressing and holding the power button until the light turns off.
2. Turn your Shark Robot over and locate the reset button.
3. Press and hold the reset button for 10 seconds or until the light on your Shark Robot starts flashing rapidly.
4. Release the reset button and wait for your Shark Robot to restart.
5. Connect your Shark Robot to your new Wi-Fi network by following the instructions in the SharkClean app.

It’s important to note that resetting your Shark Robot’s Wi-Fi connection will also erase any saved maps or schedules. If you want to keep these settings, make sure to export them before resetting the Wi-Fi connection.

Additionally, if you’re having trouble connecting your Shark Robot to Wi-Fi after resetting the connection, make sure your router is compatible with the robot and that you’re entering the correct Wi-Fi password. You can also try moving your router closer to the robot to improve the signal strength.

Conclusion

In conclusion, connecting your Shark Robot to a new Wi-Fi network is a simple process that can be done in just a few steps. With the right equipment and knowledge, you can easily update your robot’s Wi-Fi settings and get back to cleaning your home with ease.

Remember to gather all the necessary equipment, including your Shark Robot, smartphone, and Wi-Fi network information, before starting the process. Download the SharkClean app and follow the step-by-step instructions to connect your robot to the app and your new Wi-Fi network.

If you experience any issues during the process, make sure to check your Wi-Fi network connection and ensure that your robot is within range. You can also check for firmware updates and other troubleshooting tips on the SharkClean app or website.

Overall, connecting your Shark Robot to a new Wi-Fi network is a quick and easy process that can be done by anyone with the right knowledge and equipment. With your robot connected to your new network, you can enjoy the full benefits of this powerful cleaning tool and keep your home looking its best.