Blink Camera Registered to Another Account

If you have recently purchased a Blink camera and are trying to set it up, you may encounter an issue where the camera is registered to another account. This can be frustrating, but there are steps you can take to fix the problem.

Resetting your Blink camera to its default settings is one way to fix a Blink camera registered to another account. However, it’s important to note that not all Blink cameras come with an integrated reset button. If this is the case, you can unregister the camera from the previous account and register it to your own account.

In this article, we’ll explore the steps you can take to fix a Blink camera registered to another account and provide tips for managing your Blink account to prevent similar issues in the future.

Issues with Blink Camera Registered to Another Account

If you have purchased a Blink camera and received a message that it is registered to another account, it can be frustrating and confusing. Here are some common issues that you might encounter when your Blink camera is registered to another account:

• Cannot access the camera: If your Blink camera is registered to another account, you will not be able to access the camera. You will need to unregister the camera from the previous account to gain access to it.
• Cannot add the camera to your account: If you try to add a Blink camera to your account and receive a message that it is already registered to another account, you will not be able to add the camera to your account until it is unregistered from the previous account.
• Cannot delete the camera from the previous account: If you purchased a used Blink camera and received a message that it is registered to another account, you will not be able to delete the camera from the previous account. You will need to contact the previous owner to unregister the camera from their account.

In some cases, you might also encounter issues with syncing the camera with your Sync Module or accessing the camera’s recordings. These issues can also be caused by the camera being registered to another account, and can be resolved by unregistering the camera from the previous account.

Troubleshooting Steps

If you are experiencing the issue of a Blink camera being registered to another account, there are a few troubleshooting steps you can take to resolve the problem. In this section, we will go over two possible solutions: resetting your Blink camera and contacting Blink customer support.

Resetting Blink Camera

Resetting your Blink camera to its default settings is one way to fix a Blink camera registered to another account. Doing this would delete all system settings, including the current account. However, not all Blink cameras come with an integrated reset button. If your camera does not have a reset button, follow these steps:

1. Remove the batteries from the camera.
2. Wait for approximately 10 seconds.
3. Reinsert the batteries into the camera.

Contacting Blink Customer Support

If resetting your Blink camera does not work, the next step is to contact Blink customer support. They will be able to assist you in unregistering your Blink camera from the previous account and registering it to your account.

In conclusion, if you are experiencing the issue of a Blink camera being registered to another account, resetting your Blink camera and contacting Blink customer support are two possible solutions. Resetting your Blink camera can be done by removing the batteries for approximately 10 seconds, while contacting Blink customer support can be done by filling out a form on their website.

How to Delete a Blink Sync Module Without a Serial Number?

If you need to delete a Blink sync module without a serial number, you can follow these steps:

1. Open the Blink Sync Module App: The first thing you need to do is open the Blink Sync Module App. To do this, find the app on your home screen and tap on it. You can also search for it in the App Store if you can’t find it. Avoid using a third-party app to open the Blink Sync Module App, as this can cause problems.
2. Tap on the Devices Tab: Once you have opened the app, tap on the Devices tab. This will show you a list of all the devices that are currently connected to your Blink account.
3. Select the Sync Module: Find the Sync Module that you want to delete and select it. If you don’t know which one it is, you can try deleting them one by one until you find the right one.
4. Tap on the Delete Button: Once you have selected the Sync Module, tap on the delete button. This will remove the Sync Module from your Blink account.

It’s important to note that if you don’t have the serial number for your Sync Module, you won’t be able to add it back to your account. If you need to use it again, you will need to contact Blink support for assistance.

How to Unregister a Blink Sync Module?

If you want to unregister a Blink sync module from another account, you can do it in a few simple steps. Here’s how:

1. Open the Blink app on your phone and log in to the account that has access to the sync module.
2. From the home screen, select the system you want to remove and click on the sync module.
3. Tap on “Delete Sync Module” and click “OK” to confirm your choice.
4. Now, scan the QR code of the system or enter the serial code of the sync module.

Once you have completed these steps, the sync module will be unregistered from the previous account and ready to be set up on a new account.

It’s important to note that when you unregister a Blink sync module, all cameras associated with that module will also be unregistered. Therefore, it’s crucial that you only unregister the sync module if you no longer need it or if you plan to sell or give it to someone else.

If you’re having trouble unregistering a sync module, you can contact Blink support for assistance. They will be able to guide you through the process and help you resolve any issues you may be experiencing.

How to Unregister a Blink Camera Without an Account?

If you have a Blink camera that is registered to another account and you want to unregister it, you may be wondering if it is possible to do so without an account. The short answer is no, it is technically impossible to unregister a Blink camera without an account. However, you can still reset your Blink camera even if you do not have an account.

To unregister a device from Blink, you must first have an account. If you do not have an account, you will need to create one. Once you have an account, you can unregister your Blink camera by following these steps:

1. Press and hold the reset button on the side of the Sync Module until the LED blinks red.
2. Release the button and wait for the LED to blink green and blue.
3. The Sync Module is now in set up mode.
4. Delete the Sync Module from your Blink app.

Resetting your Blink camera erases all data, including user account details. So, if you reset it, you’ll need to set it up again and re-register it.

To summarize, you can’t unregister a Blink camera without an account, but you can reset it and register it to your own account. Follow the steps above to ensure proper registration.

Frequently Asked Questions

How to reset a Blink camera to a new account?

To reset your Blink camera to a new account, you need to first remove it from the previous account. To do this, go to the Blink app, select the camera you want to remove, and tap on the gear icon. Then, select “Remove Device” and follow the prompts. Once the camera is removed, you can add it to a new account by following the setup process.

Bought a house with a Blink camera, how to delete the previous owner’s account?

If you bought a house with a Blink camera already installed, you may need to delete the previous owner’s account to add the camera to your own account. To do this, contact Blink support and provide them with the serial number of the camera. They will be able to remove the camera from the previous owner’s account and assist you in adding it to your own account.

Can you factory reset a Blink camera?

Yes, you can factory reset a Blink camera by pressing and holding the black button on the back of the camera for 20 seconds. Once the LED light turns off, release the button and wait for the camera to reboot. This will erase all settings and data on the camera, including the Wi-Fi network information, and return it to its default settings.